how can i decode cw on my computer with ham radio deluxe

#How can i decode cw on my computer with ham radio deluxe manual#
#How can i decode cw on my computer with ham radio deluxe software#

#How can i decode cw on my computer with ham radio deluxe manual#

The FLDigi User's Manual can be found here:

#How can i decode cw on my computer with ham radio deluxe software#

If you still can't get the audio connected to FLDigi using the FLDigi audio controls, then you may need to audio loop back software to feed the output audio back to the input. Also, you will need to check your setup and do some testing to see what will work best. Take time to study the audio setup section. Refer to the FLDigi sound card configuration for FLDigi here. You may or may not need separate loop back audio software, depending on your PC and compatibility with existing features of FLDigi. Work on getting the audio going with FLDigi. For more examples of SDRuno operation and/or FLDigi setup and operation, you can go to and search on FLDigi as well as SDRuno. The software audio loop back solution is usually preferred over the hardware connector solution, if you need an audio loop back. While this can be done by making a loop back connector for your PC, there is also software that works well here.

Note that the SDRuno software outputs audio and the FLDigi software will be listening for audio however, you may have to loop the audio output to the audio input to get the FLDigi software to receive the audio from SDRuno. Once you are receiving the signals and hearing them well and have a good comfort level with how SDRuno operates, then it is time to test with FLDigi. You should first get comfortable tuning in stations and making sure that you can hear the RTTY or CW Morse Code signals well, such as in the example above and in this example. If you don't have that type of background, you can still get things going, but it will take a bit more study of initial setup tutorials and the user manual for SDRuno. Many examples of various SDR operations that you find on the Internet assume the user is a HAM radio operator or at least has a strong radio electronics background. If the tutorial here was not enough to get you going, then you may want to go through tutorials on operating the RSP2 as well as tutorials on initially setting up FLDigi.